Pourquoi le temps de réglage seul ne peut pas définir la qualité des retardateurs de gypse
Créé le 11.04
In gypsum-based materials, many manufacturers believe that the longer the setting time, the better the retarder performance. However, this is a major misconception. A gypsum retarder’s job is not just to delay hydration — it must ensure both proper setting time and final strength stability.
Excessive delay often causes incomplete hydration, resulting in low early strength, powdering surfaces, or even cracks after drying. On the other hand, too little retardation leads to poor workability and short open time. Balancing these two factors is the key to achieving stable product performance.
To address this, we introduce a new concept: the Strength-to-Time Ratio (STR) — a scientific indicator that measures how efficiently a gypsum retarder maintains strength while extending setting time.
💡 A higher STR means:
- More uniform hydration reaction
- Denser crystal structure
- Stronger early and final strength
- Consistent product quality
In short, a good retarder doesn’t just delay—it stabilizes. The goal is not the longest setting time, but the most efficient strength retention within that time.
Before choosing your next retarder, test it with the Strength-to-Time Ratio.
Because in modern gypsum systems, quality means balance—not delay.
Mobile Phone
WhatsApp
微信
WhatsApp